Click to enlarge image(s)
Ultimate Honda® Valkyrie Custom Motorcycle Seats
Ultimate LOWRIDER Seats for:
Honda® Valkyrie - Standard / Tourer
Ultimate LOWRIDER Seats
The Ultimate LOWRIDER seat is designed to sit the driver 1 inch lower and the same distance to the handlebars as the seating position of the Honda® OEM stock seat. We recommend the LOWRIDER for drivers under 5 foot 11 inches and weighing 200 pounds or less. If your leg inseam measures 28 inches or more, you will have both feet planted flat on the ground. We have designed this seat with 6.5 inches of built in back support and an increased nose angle so you sit back into the seat, and it prevents you from sliding forward while braking. The LOWRIDER seat is 17 inches wide.
Ultimate LOWRIDER Valkyrie seats install exactly like stock Valkyrie seats, using the stock Valkyrie seat bolts.
It's all about comfort .....
Ultimate Honda® Valkyrie custom motorcycle seats are designed with your particular comfort in mind. Ultimate design expertise for each Honda® Valkyrie seat guarantees you a long distance, no numbum ride. With Ultimate’s exclusive comfort memory foam, you will enjoy the most comfortable ride you have ever known. Correct nose angle design will prevent you from sliding forward on your Ultimate Honda® Valkyrie seat, so you will sit in your seat, not on it.
Ultimate Honda® Valkyrie Standard / Tourer Seats are available in plain or studded.
Ultimate LOWRIDER Honda® Valkyrie Standard / Tourer Seat - 4 pc Set - Studded
Ultimate LOWRIDER Seat
- The LOWRIDER Valkyrie seat is a full 19 inches wide and is designed to sit you 1 inch lower and the same distance from the handlebars as your stock Valkyrie seat.
- The LOWRIDER model seating position is designed for riders under 5 foot 11 inches and weighing 200 pounds or less.
- Increased nose angle sits you back in the seat and prevents sliding forward during braking.
- All LOWRIDER Valkyrie seats have an optional removable rider backrest.
Ultimate Removable Rider Backrest
- Pad measures 7" high by 10" wide by 1.5" thick.
- Built using the same memory foam as our seats.
- Infinite tilt to match your back angle.
- Backrest folds down forward for easily mounting and dismounting.
- Adjustment forward and back is more than 2 inches.
- Adjusts with a thumb screw while you're riding.
- No need to remove the seat or use a wrench.Includes zipper storage pouch that velcros to the back of the backrest.
- Detachable storage pouch measures 9"W x 6"H and is protected by the driver backrest built in rain flap.
Ultimate Valkyrie Passenger Seat
- The Ultimate Valkyrie Passenger Seat is 16 inches wide and mounts right onto your Valkyrie, with mounting hardware included.
- No modifications are required, unlike other custom motorcycle seats.
- Steeper nose angle prevents passenger sliding forward.
- Raised back edge of seat provides additional passenger comfort and support.
Ultimate Sissy Bar Pad
- 12 inches wide, 8 inches high and 2 1/2 inches thick
Ultimate Logo is standard on all seats in silver/grey and is included.
- Sits passenger 10 degrees straighter than the stock pad, helping eliminate back fatigue
- Mounts to your sissy bar in two different height positions, one which is like stock - and one which is 2" higher than stock
When you place your order, we will ask you which make and model sissy bar you have and whether its 2, 3 or 4 bolt mount configuration. We'll also need the measurements, from center of bolt to center of bolt, of where the pad mounts to the sissy bar.
NOTE: The Ultimate and V logo stitching option is NO LONGER standard on Ultimate Valkyrie seats and is NO LONGER included UNLESS SPECIFICALLY REQUESTED (select OLD STITCHING on order form). The new stitching includes the Ultimate logo only.
NOTE: If you have Corbin Beetle Bags on your bike, please answer the question "yes" at checkout.
Let's get you and your passenger in a comfortable and luxurious Ultimate custom motorcycle seat today, so that you can have........
----------------------------> Comfort For The Journey!